The air compressed pipe system is a fixed installation system for transporting air to the gas consumption system。Must be installed with circuit valve，It can separate the air pipeline into several parts during maintenance and maintenance。
The pipes of the air pressure generally have two main configurations: terminal pipes and ring pipes。

terminal pipe
In order to help drainter，The pipeline should have a slope of 1: 100，This can be drained appropriately。Use two long north corners to clear the right horn and a leg -shaped drainage pipe in a low place with two long distances，The main pipe can reach the initial height。

ring pipe
In the ring -shaped main pipe system, the air is mainly entered from both sides to the high consumption point。This can be reduced to low pressure drop。But the condensed water will flow in all directions，Therefore, there must be enough automatic drainage device。

Second -level pipeline
Unless a valid rear cooler and air dryer are installed，Otherwise, the working pipeline of the air air distribution system will be used as a cooling surface，So，Water and oil will accumulate on the entire pipe。

The branch pipeline leads from the top of the pipeline，is to prevent the water from the water flowing into the branch pipe，The water accumulated at the bottom of the pipeline must be discharged。

The drainage point is in the low point of the trachea，Install the same three -link joints to lead，Drainage can be regularly completed or installed by an automatic drainter。

Automatic row spending more，but save labor time，Because the condensation water in the discharge of the in charge of the pitch will cause pollution and cause many problems。